11 Analog Input (Option)
11.3
Specification of Mating Connector for X72
•
•
Specification of the Cable leading to the Analog Input
•
•
•
•
•
86
Description of Connections
9-pin female SUB-D connector
Metallized housing
Cable size: 2 * 0.14 mm² min. (AWG 26(2))
Cores have to be twisted and entirely shielded.
The shield must be connected to the connector housings on both ends of the
cable with the greatest possible surface area.
Material: Copper
Temperature class: 60 °C
Pin Assignment of the Analog Input
X72
Connect shield with the greatest possible surface area!
Pin
1
6 - 9
2 - 5
Shielding
Use metallized housing only!
Signal
Analog signal (0 - 10 V to pin 6)
Analog GND (connected to earth in the device)
Do not use
Jetter AG