Personnel Qualification; Modifications And Alterations To The Device; Repair And Maintenance - Jetter JM-206-230 User Manual

1 Safety Instructions
1.1.3
Depending on the life cycle of the product, the persons involved must possess
different qualifications. These qualifications are required to ensure proper handling
of the JetMove 206B-230 in the corresponding life cycle.
1.1.4
For safety reasons, no modifications and alterations to the digital servo
amplifier JetMove 206B-230 and its functions are permitted.
Any modifications to the servo amplifier JetMove 206B-230 not expressly authorised
by the manufacturer will result in a loss of any liability claims to Jetter AG.
The original parts are specifically designed for the servo amplifier JetMove
206B-230. Parts and equipment from other manufacturers are not tested by
Jetter AG, and are, therefore, not released by Jetter AG.
The installation of such parts may impair the safety and the proper functioning of the
digital servo amplifier JetMove 206B-230.
Any liability on the part of Jetter AG for any damages resulting from the use of non-
original parts and equipment is excluded.
1.1.5
Repairs at the digital servo amplifier JetMove 206B-230 must not be carried out by
the operator. The servo amplifier JetMove 206B-230 does not contain any parts to
be repaired by the operator.
For being repaired, the servo amplifier JetMove 206B-230 must be sent to Jetter AG.
12

Personnel Qualification

Product Life Cycle
Transport / Storage:
Mounting / Installation:
Commissioning /
Programming:
Operation:
Decommissioning:
Modifications and Alterations to the
Device

Repair and Maintenance

Minimum Qualification
Trained and instructed personnel with knowledge in
handling electrostatic sensitive components.
Trained personnel specified in electrical automotive
engineering, such as industrial electronics
engineers.
Trained and instructed experts with profound
knowledge of, and experience with, electrical / drive
engineering, such as electronics engineer for
automation technology.
Trained, instructed and assigned personnel with
knowledge of operating electronic devices.
Specialized personnel with training in electrical
engineering, such as industrial electronics
technician.
Jetter AG