Appendix C: Glossary - Jetter JM-206-230 User Manual

Appendices

Appendix C: Glossary

110
AC
CE
DC
DIN
EG
EC Low Voltage
Directive
Electro-Magnetic
Compatibility (EMC)
EN
ESD
Hazard analysis
HIPERFACE
IEC
IP
JetMove
Alternating Current: Alternating current
Communautés Européenes
European Union
Direct Current
Deutsches Institut für Normung e.V. = German Industry
Standard
Europäische Gemeinschaft = European Union
To be considered when using electric devices of a rated
voltage between 50 and 1,000 V AC and between 75
and 1,500 V DC.
Definition according to the EMC regulations:
"EMC is the ability of a device to function in a
satisfactory way in an electro-magnetic environment
without causing electromagnetic disturbances itself,
which would be unbearable for other devices in this
environment."
Europäische Norm = European Standard
Electrostatic Discharge
Excerpt from the Machinery Directive:
"The manufacturer is under an obligation to assess the
hazards in order to identify all of those which apply to his
machine; he must then design and construct it taking
account of his assessment."
High Performance Interface
HIPERFACE designates a sensor-transducer system
by Sick / Stegmann. The SinCos motor feedback
system with the standardised HIPERFACE interface is
often used in digital drive technology. Unlike the
resolver, the SinCos motor feedback system with
HIPERFACE interface contains electronic components.
Over several motor rotations, a HIPERFACE will report
the absolute position values; this cannot be performed
by a resolver. A HIPERFACE is far more precise than a
resolver, but also more expensive.
International Electrotechnical Commission
International Protection
JetMove is the type designation of a digital servo
amplifier series produced by Jetter AG.
The extension 206B-230, for example, marks the
following features:
– 206 identifies a rated current of 6 A.
– 230 identifies the operating voltage of the rated
power supply.
Jetter AG