Function Generator - Siemens Sinumerik 802D sl Instruction Manual

Commissioning
9.11 Diagnosis via STARTER
9.11.1

Function generator

Description
The function generator can be used, for example, to perform the following tasks:
S for measuring and optimizing closed-loop control circuits;
S for comparing the dynamic properties of coupled drives;
S for specifying a straightforward traversing profile without traversing program.
The function generator can be used to generate various signal forms.
The output signal can be supplied to the closed-loop control circuit via the BICO circuit in the
"Connector output" mode.
In the Servo mode, this setpoint can additionally be supplied into the control structure in
accordance with the currently selected mode, for example, as a current setpoint, disturbing
torque or speed setpoint. Any influence of overlaid closed-loop control circuits is suppressed
automatically.
Parameterizing and operating the function generator
The function generator is parameterized and operated via the STARTER parameterization
and commissioning tool.
Fig. 9-12
9-112
The "Function generator" start screen
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0