10.3.3
Configuring and checking the topology of the drives
Now that you have entered the component topology and configuration for the drive unit and
integrated these in the STARTER project automatically by carrying out the steps described
in Section 10.3.2.
Now, use the following operating sequence to configure the motor for the drive, and then
check the topology.
Fig. 10-57 Project_1 configuration
1. In the project navigator, choose the Drives folder and double-click Drive navigator under
Siemens Automation Parts
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
the drive.
The Drive Navigator dialog box provides an overview in which you can configure the
main drive functions.
10.3
Double-click on
Drive navigator.
Creating a Drive Project
Creating a drive project ONLINE
10-157