Siemens Sinumerik 802D sl Instruction Manual page 14

System Overview
Toolbox
A tool box is delivered on CD ROM together with the appropriate system software.
The toolbox contains software tools for configuring the control system. It must be installed
on your PC/PG.
The following software can be found in the Toolbox:
S Setup file for the technologies
S Cycle packages for the technologies
S Reloadable languages
S Reloadable system blocks (SDB)
S RCS802D Commissioning and Diagnostic tool
This program can be used to transfer texts, user data and programs from the PC to the
CNC operator panel (PCU) and vice versa.
S "PLC 802 Programming Tool" – tool for creating the PLC user program
S PLC user library
S "Starter" – parameterization and commissioning tool for the SINAMICS drive
Note
The table of contents and notes for setup can be found in the siemense.txt file.
1-12
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0