Siemens Sinumerik 802D sl Instruction Manual page 200

Machine and Setting Data 802D
A.1 List of machine data
306 G_GROUP2
decimal User-oriented G group for position display
0 2
307 G_GROUP3
decimal User-oriented G group for position display
0 8
308 G_GROUP4
decimal User-oriented G group for position display
0 9
309 G_GROUP5
decimal User-oriented G group for position display
0 10
310 FG_GROUP1
decimal User-oriented G group for position display (external language)
0 1
311 FG_GROUP2
decimal User-oriented G group for position display (external language)
0 2
312 FG_GROUP3
decimal User-oriented G group for position display (external language)
0 8
313 FG_GROUP4
decimal User-oriented G group for position display (external language)
0 9
314 FG_GROUP5
decimal User-oriented G group for position display (external language)
0 10
330 CMM_POS_COORDINATE_SYSTEM
decimal Coordinate position of machine *)
0 0
*) Explanation:
Both the position and the size of the representation are handed over during initialization. The position of the coordinate system
can be influenced by the parameter "Axis direction" in the header of the file.
The following positions are possible:
The positions of the elements must be specified in position 4 (mathematic coordinate system). The simulation will then auto-
matically convert the representation to the relevant system.
331 CONTOUR_MASK
decimal Activating the 802 contour definition programming
0 1
A-198
1 1000
1 1000
1 1000
1 1000
1 1000
1 1000
1 1000
1 1000
1 1000
0 7
Position
0
1
2
3
4
5
6
7
0 1
immediately
INTEGER
immediately
INTEGER
immediately
INTEGER
immediately
INTEGER
immediately
INTEGER
immediately
INTEGER
immediately
INTEGER
immediately
INTEGER
immediately
INTEGER
immediately
BYTE
X+ Z+
up to the right
up to the left
down to the right
down to the left
to the right top
to the left up
to the right down
to the left down
immediately
BYTE
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
3/7
3/7
3/7
3/7
3/7
3/7
3/7
3/7
3/7
3/7
3/7
6FC5 397-0CP10-1BA0