7.9
Connecting the full keyboard to the CNC operator panel
The interconnecting cable for connecting the NC full keyboard to the CNC operator panel is
included in the scope of supply. Connect the female connector X9 on the CNC operator
panel to the PS/2 socket on the rear of the NC full keyboard.
For more information, please refer to:
References:
Siemens Automation Parts
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
7.9
Connecting the full keyboard to the CNC operator panel
/BU/, Catalog
Connecting
7-63