Siemens Sinumerik 802D sl Instruction Manual page 49

Drilling pattern for the NC full keyboard (installed beneath the PCU)
1) M4 rivet-down, insert nut or M4 extruded hole (8x)
2) Drill holes for fixing the position ∅ 5 mm (2x)
Fig. 5-8 Drilling pattern for the NC full keyboard (installed beneath the PCU)
Siemens Automation Parts
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0
5.3 Dimension drawings and drilling patterns for the NC full keyboard
290
285
283.4
142.5
1.6
0
5
Dimension Drawings
5-47