Siemens Sinumerik 802D sl Instruction Manual page 156

Creating a Drive Project
10.3 Creating a drive project ONLINE
5. Confirm the following queries and messages by choosing OK:
– Interactive screenform "Reset to default settings?"
– Interactive screenform "Default settings have been restored"
– Interactive screenform "Data have been successfully copied from RAM to ROM"
Fig. 10-51 Automatic configuration
6. In the Project Navigator, double-click on Automatic configuration under the drive unit.
Fig. 10-52 Automatic commissioning
7. Click on the Start automatic configuration button.
STARTER will automatically search for all drive unit components connected correctly and
will load them automatically into STARTER. In our case, it has detected a drive.
10-154
Double-click on
Automatic configuration.
Click on
Start automatic configuration.
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
6FC5 397-0CP10-1BA0