Siemens Sinumerik 802D sl Instruction Manual page 30

Interfaces
4.2 MCPA module interfaces
4.2 MCPA module interfaces
Overview
The illustration below shows the MCPA module with its interfaces and the status display.
Fig. 4-2
Table 4-7
Interfaces to the MCP
X1 and X2
I/O interface
X1020 and X1021
Analog spindle connection
X701
Interface to the PCU
X110
Assignment of the interface to the MCP
Designation:
Type:
4-28
X2
X1
Position of the interfaces and of the status display on the MCPA module
Interfaces
Interfaces
40-pin plug connectors for connecting the machine control panel (MCP)
10-pin plug connectors for connection of the power supply and of the
digital inputs and ouptuts
9-pin D-Sub connector for connecting an analog spindle with directly
mounted spindle actual-value encoder (TTL)
48-pin plug connectors for connecting the MCPA module to the PCU
X1, X2
40-pin ribbon-cable connector
X1020
X1021
1
10
1
10
X110
Function
SINUMERIK 802D sl Instruction Manual (BA), 05/2005 Edition
X701
LED status display
6FC5 397-0CP10-1BA0