Jog; Ramp-Function Generator (Hlg) - Siemens MICROMASTER 420 Operating Manual

6 Commissioning
6.2.10

JOG

JOG frequency right
P1058 =...
Frequency in Hz when the motor is being
jogged in the clockwise direction of rotation.
JOG frequency left
P1059 =...
Frequency in Hz when the motor is being
jogged in the counter-clockwise direction of
rotation.
JOG ramp-up time
P1060 =...
Ramp-up time in s from 0 to the maximum
frequency (P1082). The JOG ramp-up is
limited by P1058 or P1059.
JOG ramp-down time
P1061 =...
Ramp-down time in s from the maximum
frequency (P1082) to 0.
6.2.11

Ramp-function generator (HLG)

Skip frequency 1 (entered in Hz)
P1091 =...
Defines skip frequency 1 which avoids
effects of mechanical resonance and
suppresses frequencies within +/- P1101
(skip frequency bandwidth).
Skip frequency 2
P1091 =...
Skip frequency 3
P1091 =...
Skip frequency 4
P1091 =...
Skip frequency bandwidth
P1101 =...
(entered in Hz)
Ramp-up time
P1120 =...
(enters the accelerating time in s)
Ramp-down time
P1121 =...
(enters the deceleration time in s)
Rump-up initial rounding time
P1130 =...
(entered in s)
Ramp-up final rounding time
P1131 =...
(entered in s)
Rump-down initial rounding time
P1132 =...
(entered in s)
Ramp-down final rounding time
P1133 =...
(entered in s)
Rounding type
P1134 =...
0 Continuous smoothing
1 Discontinuous smoothing
OFF3 ramp-down time
P1135 =...
Defines ramp-down time from maximum frequency to standstill for OFF3 command.
20
5.00 Hz
JOG
5.00 Hz
f
P1082
(f )
max
P1058
10.00 s
10.00 s
P1060
0.00 Hz
f
out
0.00 Hz
0.00 Hz
0.00 Hz
P1091
2.00 Hz
Skip frequency
10.00 s
f
P1082
(f )
max
f
1
10.00 s
P1120
0.00 s
The rounding times are recommended as
abrupt responses can be avoided therefore
reducing stress and damage to the mechanical
0.00 s
system.
The ramp-up and ramp-down times are
0.00 s extended by the component of the rounding
ramps.
0.00 s
0
Issue 04/04
t
P1061
P1101
Skip frequency
bandwidth
f
in
t
P1121
5.00 s
MICROMASTER 420
Compact Operating Manual