Setup
This chapter describes the initial setup procedures to prepare the server for operation.
Optional services
Delivered by experienced, certified engineers, HPE support services help you keep your servers up and
running with support packages tailored specifically for HPE ProLiant systems. HPE support services let you
integrate both hardware and software support into a single package. A number of service level options are
available to meet your business and IT needs.
HPE support services offer upgraded service levels to expand the standard product warranty with
easy‑to‑buy, easy‑to‑use support packages that will help you make the most of your server investments.
Some of the HPE support services for hardware, software, or both are:
•
Foundation Care – Keep systems running.
The time commitment for this service might vary depending on the site's geographical region. For more
service information available at your site, contact your local HPE support center.
•
Deployment service for both hardware and software.
•
HPE Education Services – Help train your IT staff.
For more information on HPE support services, see the HPE Pointnext website:
http://www.hpe.com/services
Initial server setup overview
Procedure
1.
Unpack the server shipping carton.
2.
If applicable, install any hardware options that are shipped separately from the server.
For detailed option installation instructions, see the relevant section in Hardware options installation on
page 31.
3.
Review the initial server setup prerequisites.
4.
Connect the I/O devices.
5.
Connect the network cable.
6.
Connect the power cord.
7.
Power on the server for the first time.
8.
Install an operating system (OS).
9.
As a best practice, Hewlett Packard Enterprise recommends that you install the latest firmware,
drivers, and system software before using the server for the first time.
10. Register the server.
Unpacking the server shipping carton
Unpack the server shipping carton. The contents of the server shipping carton include:
•
Server
•
Power cord
•
Printed setup documentation
14
Setup
Need help?
Do you have a question about the ProLiant MicroServer Gen10 and is the answer not in the manual?
Questions and answers