Danfoss VLT AQUA High Power Operation Instructions Manual page 44

3 How to Install
Install the pedestal on the floor. Fixing holes are to be drilled according
to this figure:
3
Mount the drive on the pedestal and fix it with the included bolts to the
pedestal as shown on the illustration.
NB!
Please see the
44
Pedestal Kit Instruction Manual, 175R5642
MG.20.P3.02 - VLT
VLT AQUA High Power Operation Instructions
Illustration 3.34: Drill master for fixing holes in floor.
Illustration 3.35: Mounting of drive to pedestal
, for further information.
®
is a registered Danfoss trademark