Stop-D Functionality - Sun Microsystems Sun Blade 150 Service Manual

10.2.4

Stop-D Functionality

The Stop-D (diags) key sequence is not supported on systems with USB keyboards.
However, the Stop-D functionality can be closely emulated by using the power
button double-tap (see Section 10.2.2, "Stop-N Equivalent Functionality" on
page 10-2), since this temporarily sets diag-switch? to true. If you want to turn
on the diagnostic mode permanently, type:
ok setenv diag-switch? true
10-4 Sun Blade 150 Service Manual • June 2002