Test-All; Watch-Clock - Sun Microsystems SPARCstation Voyager Service Manual

For example:
ok test floppy
Testing floppy disk system.
drive.
Test succeeded.

test-all

The test-all command tests all devices in the system which have a selftest
program. Disks, tapes, and CD-ROMs are not tested by test-all. Tests are
executed in order using the device tree (viewed with the show-devs command) as
reference. The diag-switch? parameter must be set true to run this test.
ok test-all

watch-clock

Displays seconds from the NVRAM/TOD (Non-Volatile RAM/Time of Day). The
counter counts from 0 to 59 repeatedly. For example:
ok watch-clock
Watching the 'seconds' register of the real time clock chip.
It should be 'ticking' once a second.
Type any key to stop
41
To interrupt the test, press any key on the keyboard.
144 SPARCstation Voyager Service Manual • December 1994
A formatted disk should be in the