2.5 in.
6.35 cm
FIGURE A-1
A.5
Reference Information
This section contains the following reference information:
Section A.5.1, "IDE Cabling Configuration" on page A-4
I
Section A.5.2, "CD-ROM and DVD-ROM Jumper Settings" on page A-5
I
Section A.5.3, "CD Handling and Use" on page A-5
I
A.5.1
IDE Cabling Configuration
FIGURE A-2
optional secondary hard drive. An optional cable with two connectors is shipped
with the secondary drive and is connected as shown in
A-4
Sun Blade 150 Service Manual • June 2002
0.0 in.
Minimum Clearance for System Cooling
shows the IDE cabling. The Sun Blade 150 system can support an
0.0 in.
4.0 in.
10.16 cm
FIGURE A-2.