Sun Microsystems Sun Blade 150 Service Manual page 53

diag-level Variable Set to max
CODE EXAMPLE 3-1
Probing /pci@1f,0 Device 7
serial
Probing /pci@1f,0 Device c network firewire usb hub keyboard mouse
storage
Probing /pci@1f,0 Device 3
dimm
dimm dimm ppm beep fan-control
Probing /pci@1f,0 Device 8
Probing /pci@1f,0 Device d
Probing /pci@1f,0 Device 13
Probing /pci@1f,0 Device 5
Probing /pci@1f,0/pci@5 Device 0
Probing /pci@1f,0/pci@5 Device 1
Probing /pci@1f,0/pci@5 Device 2
Sun Blade 150 (UltraSPARC-IIe 650MHz), Keyboard Present
Copyright 1998-2002 Sun Microsystems, Inc.
OpenBoot 4.6, 1024 MB memory installed, Serial #51602330.
Ethernet address 0:3:ba:13:63:9a, Host ID: 8313639a.
Skipping diagnostic script because diag-script = none
Resetting ...
Speed Jumper is set to 0000.0000.0000.0008
Software Power ON
@(#)OBP 4.6.0 2002/04/03 12:28
CPU SPEED 0x0000.0000.26be.3680
Initializing Memory Controller
MCR0 0000.0000.76a0.cf04
MCR1 0000.0000.8000.8000
MCR2 0000.0000.cff0.eeee
MCR3 0000.0000.0060.0052
Clearing E$ Tags
Clearing I/D TLBs Done
Probing Memory Done
Clearing Memory Done
MEM BASE = 0000.0000.c000.0000
MEM SIZE = 0000.0000.1000.0000
MMUs ON
Copy Done
isa dma floppy parallel power serial
pmu i2c temperature card-reader dimm
sound
ide disk cdrom
SUNW,m64B
pci
Nothing there
Nothing there
Nothing there
Done
(Continued)
All rights reserved.
Chapter 3 Power-On Self-Test 3-17