Sun Microsystems Sun Blade 150 Service Manual page 118

1
3
FIGURE 7-5
10. Verify that the secondary IDE cable connector is connected to riser board
connector IDE2 (J503). See
Note – Ensure that the cables are properly oriented by aligning the connector keys.
11. Verify that the CD-ROM or DVD-ROM cable is connected to the primary (IDE1)
cable connector labeled CD/DVD (
12. Connect the hard drive IDE cable connector labeled Primary HDD to the primary
hard drive.
13. Connect the power cable to the secondary hard drive (
7-10 Sun Blade 150 Service Manual • June 2002
Installing a Secondary Hard Drive
FIGURE 7-6.
CD/DVD-ROM drive
IDE cable connector
2
Secondary hard drive
4
FIGURE 7-5).
IDE 1
).
FIGURE 7-6