All Above - Sun Microsystems Ultra 5 Product Notes

Video
The video diagnostic validates the UPA graphics.
CODE EXAMPLE 16
CODE EXAMPLE 16
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===> 12
TEST='video_test'
Please connect the monitor and use ttya/ttyb when running this test
if you are using the screen it may be become unreadable
SUBTEST='mach64-chip-id-vendor-id-check'
SUBTEST='video-frame-buffer-test'
SUBTEST='mach64-walk-one-test'
SUBTEST='mach64-walk-zero-test'
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===>

All Above

The all above diagnostic validates the system unit.
CODE EXAMPLE 17
Note – The all above diagnostic will stall if the TIP line is installed on serial port A
or serial port B.
CODE EXAMPLE 17
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===> 13
TEST='all_pci/cheerio_test'
SUBTEST='vendor_id_test'
SUBTEST='device_id_test'
SUBTEST='mixmode_read'
SUBTEST='e2_class_test'
SUBTEST='status_reg_walk1'
SUBTEST='line_size_walk1'
SUBTEST='latency_walk1'
SUBTEST='line_walk1'
24 Sun Ultra 5/10 Product Notes • April 1998
identifies the video output message.
Video Output Message
identifies the all above output message.
All Above Output Message