Sun Microsystems Sun Blade 150 Service Manual page 55

Note – Both POST and OpenBoot PROM report the CPU as an UltraSPARC IIe
processor. The CPU in your system is an UltraSPARC IIi processor.
Note – Video output is disabled while POST is initialized.
diag-level Variable Set to min
CODE EXAMPLE 3-2
Speed Jumper is set to 0000.0000.0000.0008
Hardware Power ON
@(#)OBP 4.6.0 2002/04/03 12:28
Executing Power On SelfTest
@(#) Sun Blade 150 POST 2.0.1 05:13 PM on 04/23/02
Processor Module Identification
UltraSPARC-IIe Version 1.3
Init POST BSS
Init System BSS
NVRAM Tests
NVRAM Battery Detect Test
NVRAM Scratch Addr Test
NVRAM Scratch Data Test
DMMU TLB Tags
DMMU TLB Tag Access Test
DMMU TLB RAM
DMMU TLB RAM Access Test
Probe Ecache
Probe Ecache
Ecache Size = 0x00080000 bytes = 512 KBytes
Measure CPU Clock
Initializing Southbridge
Nominal CPU speed is 650 MHz
All CPU Basic Tests
V9 Instruction Test
CPU Soft Trap Test
CPU Softint Reg and Int Test
All Basic MMU Tests
DMMU Primary Context Reg Test
DMMU Secondary Context Reg Test
Chapter 3 Power-On Self-Test 3-19