Address Environmental Concerns; With The Adjustable Mount; Without The Adjustable Mount; Figure 57. Weather Shield Installation - quanergy M8 User Manual

Address Environmental Concerns

If the installation environment is likely to receive heavy exposure to sun, heat, or
precipitation, you may prefer to protect the M8 sensor by adding the optional Weather
Shield accessory (Figure 57). This may be used with or without the Adjustable Mount.

With the Adjustable Mount

Install the Weather Shield accessory with the Adjustable Mount, as follows:
1. Place the Weather Shield on the Adjustable Mount pitch plate.
2. Slide the Weather Shield toward the rear of the pitch plate.
3. Align the Weather Shield screw holes with the pitch plate's rear screw holes.
8
4. Screw through the rear lip of the Weather Shield accessory and into the pitch plate.
Weather Shield
D
Socket Head
Cap Screw (2X)
M5 x 8 mm
C
B

Without the Adjustable Mount

A
The Weather Shield accessory can be fastened to a pole or flat surface without the
Adjustable Mount by making use of the strapping slots and mounting holes (Figure 57).
8
7
19
11 9

Figure 57. Weather Shield Installation

7
M8 Sensor User Guide, QPN 96-00001 Rev K
6 5
Slot (4X) for Strapping
Mounting Hole (2X) for Screws or U-Bolt
TILT PLATE
Pitch Plate
Adjustable Mount
FLEXMOUNT ASSEMBLY
6 5
4
REV
ITEM NO. PART NUMBER
1 40-00105
2 40-00109
3 40-00108
40-00114
4
5 87-00123
6 41-00112
7 87-00137
8 87-00126
9 87-00138
40-00107
10
11 93925A260
12 87-00140
13 87-00134
14 87-00130
15 87-00131
16 93925A270
40-00113
17
18
19 40-000103
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MM
TOLERANCES:
DECIMALS
.X = .25
.XX = .10
.XXX = .05
THIRD ANGLE PROJECTION
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
MATERIAL
SEE NOTE
DRAWING IS THE SOLE PROPERTY OF
QUANERGY SYSTEMS INC. ANY
FINISH
REPRODUCTION IN PART OR AS A WHOLE
SEE NOTE
WITHOUT THE WRITTEN PERMISSION OF
QUANERGY SYSTEMS INC IS
PROHIBITED. DO NOT SCALE DRAWING
4
Page 83
3
DESCR
DRAWN
ANGLES
CHECKED
.5 DEGREES
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
3