Procedures; Connect Single Sensor To The Gps Receiver; Figure 45. Nmea/Pps Signals Synchronized On Single Sensor - quanergy M8 User Manual

Procedures

Step through the next few illustrations and procedures to get the M8 system to fully
cooperate with the Global Positioning System (GPS) unit and enable the Coordinated
Universal Time (UTC) timestamp.

Connect Single Sensor to the GPS Receiver

Figure 46 illustrates the sending of the NMEA sentence and PPS signal from the GPS
receiver to a single sensor.

Figure 45. NMEA/PPS Signals Synchronized on Single Sensor

M8 Sensor User Guide, QPN 96-00001 Rev K Page 71