Wiring - RayTek CS210 Instruction Manual

10.5.4 Wiring

For the detailed wiring of the LRM see section 13.8
For recommended cables see section 4.5
The CS210 position indicator (master) must be wired to the <kiln trigger> labeled input
on the terminal line of the LRM remote control box! All subsequent LRM position
indicators must be wired to the inputs <Ring 1>, <Ring 2> and so.
CS210
Flat Iron
(steel ST37)
Figure 87: Trigger Bar – details –
LRM
Cable Requirements, page 14.
Rev. B4 Feb 2015
Angle Iron
welded
Wiring, page 122.
Accessories
89