RayTek CS210 Instruction Manual page 109

Auxiliary Software
<Operations> Tab / <Drillings>
The following dialog allows you to review the existing drillings of the refractory. The lower tool bar
provides an intuitive navigation within the list of drillings, as well as an addition, deletion, and
review of them.
Figure 105: <Operations> Tab / <Drillings>
Within the dialog for adding/reviewing drillings, the user can define the date, position and thickness
of a drilling.
Figure 106: Adding a Drilling
<Operations> Tab / <Shell Repair>
<Shell repairs> are managed very similar to <Zone changes> or <Drillings>, but they don't show up in
the refractory view.
CS210 109
Rev. B4 Feb 2015