Also, in the upper part of the screen, there're some icons that permit you to:
•
Display only the profile chart
Display only the thermogram
•
•
Display both (default option)
3D standard view for the thermogram
•
3D real time view for the thermogram (available as accessory), see section 11.5
•
View, page 112)
Both in the chart and the thermogram, you can zoom into a specific area of the kiln. To
do so, click and drag from left to right, creating a square surrounding the area of
interest!
CS210
Rev. B4 Feb 2015
Operation
3D Real Time
63