Alarms Detail; Alarms List - RayTek CS210 Instruction Manual

It is not possible to add, edit or delete any alarm from this repository. Alarms are
periodically and automatically erased based on the settings in the Historical
Management under

6.2.13.2 Alarms detail

Clicking the <Look up> button in the <Repository of errors> view will launch the <Alarm detail> view.
In the <Alarm detail> you can see all details for each single alarm: the period of time that the alarm
existed (there's a chance that it's still active), which device experienced the alarm, the type of alarm,
registered temperature, a brief comment about the problem and its control status (the user, the date
and the comment).

6.2.13.3 Alarms list

Using this screen you can print reports of all alarms registered in the system. These lists or reports are
fully configurable by using selection filters and sorting criteria.
Selection filters allow filtering information using:
• Alarm identifier
Starting date
•
Ending date
•
State
•
Control
•
CS210
<Others> Tab, page 44!
Figure 45: Alarms detail
Rev. B4 Feb 2015
Configuration
51