Smartgen HGM400N Series User Manual page 5

and over power detection functions;
 Precision collect and display parameters about Engine,
Temp. (WT)
Oil pressure (OP)
Fuel Level (FL)
Engine Speed (RP)
Battery Voltage (VB)
Charger Voltage (VD)
Hours Counter (HC)
Start times
 Control & Protection: automatic start/stop of the genset, ATS(Auto Transfer Switch) control with
perfect fault indication and protection function;
 With ETS(Energize To Stop), idle control, pre-heat control, speed raise control and speed drop
control function, All output ports are relay-out;
 Parameter setting: parameters stored in internal FLASH can be modified and cannot be lost even in
case of power outage; all the controller parameters can be adjusted using front panel of the controller
or via USB or RS485 interface by using PC.
 Multiplex input port 3 and 4 can be used in various fields: input 3 can be used as auxiliary input port
or fuel level sensor while input 4 can be used as auxiliary input port or configurable sensor.
 More kinds of curves of temperature, oil pressure, fuel level can be used directly and users can
define the sensor curves by themselves;
 Configurable sensor: can be set as temperature sensor, oil pressure sensor or fuel level sensor,
enable the detection of double temperature, double oil-pressure and double fuel level.
 Multiple crank disconnect conditions (magnetic pickup, oil pressure, generator frequency) are
optional;
 With emergency start function;
 With fly teeth auto-recognize function;
 Widely Power supply range: DC(8~35)V, suitable to different start battery voltage environment.
 All parameters used digital adjustment, instead of conventional analog modulation with normal
potentiometer, more reliability and stability;
 With maintenance function. Types (date or running time) can be set. Actions (warning, alarm
shutdown) can be set when maintenance time out;
 With event log function (max. 99 pieces of record), real-time clock, and schedule to start/stop
generator function (start once monthly/weekly/daily on/off load can be set).
 IP55 waterproofness with rubber-ring gasket;
 With metal fixing clips;
 Modular design, self-extinguished ABS plastic enclosure, pluggable connection terminals and
embedded installation way; compact structure with easy mounting.
HGM400N Series Genset Controller
°C/°F
kPa/psi/bar
% remain fuel level L
r/min
V
V
2017-04-21
HGM400N Series Genset Controller User Manual
Version 1.2 Page 5 of 36