Accessories - Endress+Hauser Proline Prosonic Flow 90 Operating Instructions Manual

Proline Prosonic Flow 90
Endress+Hauser
8

Accessories

Various accessories, which can be ordered separately from Endress+Hauser, are available for the
transmitter and the sensor. The Endress+Hauser service organisation can provide detailed informa-
tion on the order codes of your choice.
Accessory
Transmitter wall-mount
housing Prosonic Flow 90
Mounting set for
transmitter
Flowmeter sensor W
Flowmeter sensor P
Flowmeter sensor U
Sensor holder set for
Prosonic Flow W/P sensors
Description
Transmitter for replacement or for stock. Use the order
code to define the following specifications:
– Approvals
– Degree of protection / version
– Cable entries
– Display / power supply / operation
– Software
– Outputs / inputs
Mounting set for wall-mount housing.
Suitable for:
– Wall mounting
– Pipe mounting
– Panel mounting
Mounting set for alum. field housing
Suitable for pipe mounting (3/4"...3")
Clamp-on Sensor:
–
20...+80 °C; DN 100...4000; IP67
–
20...+80 °C; DN 50...300; IP67
–
20...+80 °C; DN 100...4000; IP68
–
20...+80 °C; DN 50...300; IP68
Installation sensor
–
40...+80 °C; DN 200...4000; IP68
Clamp-on Sensor:
–
40...+80 °C; DN 100...4000
–
40...+80 °C; DN 50...300
Clamp-on Sensor:
0...+170 °C; DN 100...4000
0...+170 °C; DN 50...300
Clamp-on Sensor:
–
20...+80 °C; DN 15...100
– Sensor holder, fixed retaining nut, clamp-on
version
– Sensor holder, removable retaining nut,
clamp-on version
– Sensor holder, welding type, DN 200...300,
Insertion version, single channel
– Sensor holder, welding type, DN 300...400,
Insertion version, single channel
– Sensor holder, welding type, DN 400...4000,
Insertion version, single channel
– Sensor holder, welding type, DN 400...4000,
Insertion version, two channel
8 Accessories
Order Code
−
90XXX XXXXX ********
−
DK9WM A
−
DK9WM B
−
DK9WS A*
−
DK9WS B*
−
DK9WS M*
−
DK9WS N*
−
DK9WF K*
−
DK9PS A*
−
DK9PS B*
−
DK9PS E*
−
DK9PS F*
−
DK9UF A
−
DK9SH A
−
DK9SH B
−
DK9SH C
−
DK9SH D
−
DK9SH E
−
DK9SH F
75