Overview Of Accessories; Authorized Installation Personnel - Endress+Hauser t-mass T 150 Installation Instructions Manual

EA01105D
1

Overview of accessories

The Installation Instructions apply to the following accessories:
Order structure
Low-pressure versions
DK6003-PK
DK6003-PL
Medium-pressure versions
DK6003-PM
DK6003-PN
Can only be used in conjunction with:
• Standard version (order code for "Length", option L6 "330 mm, 13")
• Process connections with PEEK clamping rings
2

Authorized installation personnel

Authorization to carry out installation depends on the measuring device' s approval type. The
table below shows the authorized group of people in each case.
Whoever carries out the installation has full responsibility to ensure that work is carried
out safely and to the required quality standard. He/she must also guarantee the safety of
the device following installation.
Measuring device approval
Without approval
With approval (e.g. IECEx)
For custody transfer
1) 1 = Qualified specialist on customer side, 2 = Service technician authorized by Endress+Hauser,
3 = Endress+Hauser (return measuring device to manufacturer)
4 = Check with local approval center if installation/modification must be performed under supervision.
4
Process connection
G3/4"
3/4" NPT
G3/4"
3/4" NPT
Device component
Mounting set with ball valve and safety chain for inserting or
extracting the sensor at process pressures up to max. 4.5 barg (65
psi)
Mounting set with ball valve and extractor assembly for inserting
or extracting the sensor at process pressures up to max. 16 barg
(235 psi)
Authorized installation personnel
1)
1, 2, 3
1, 2, 3
4
Endress+Hauser