Spare Parts; Return; Disposal; Accessories For Liquiphant Density - Endress+Hauser Liquiphant FTL51B Density Operating Instructions Manual

Accessories for Liquiphant Density

28
12.2

Spare parts

• Some replaceable device components are identified by a spare part nameplate. This
contains information about the spare part.
• All the spare parts for the measuring device, along with the order code, are listed in the
W@M Device Viewer (www.endress.com/deviceviewer) and can be ordered. If available,
users can also download the associated Installation Instructions.
Device serial number or QR code:
Located on the device and spare part nameplate.
12.3

Return

The requirements for safe device return can vary depending on the device type and
national legislation.
1. Refer to the web page for information:
http://www.endress.com/support/return-material
 Select the region.
2. Return the device if repairs or a factory calibration are required, or if the wrong
device was ordered or delivered.
12.4

Disposal

If required by the Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE), the product is marked with the depicted symbol in order to minimize the
disposal of WEEE as unsorted municipal waste. Do not dispose of products bearing this
marking as unsorted municipal waste. Instead, return them to the manufacturer for
disposal under the applicable conditions.
13 Accessories for Liquiphant Density
13.1 Protective cover for aluminum dual compartment
housing
• Material: stainless steel 316L
• Order number: 71438303
Liquiphant FTL51B Density
Endress+Hauser