Accessories; Device-Specific Accessories; Device Viewer - Endress+Hauser Cerabar PMP71B Operating Instructions Manual

Accessories

70
14 Accessories
14.1

Device-specific accessories

14.1.1 Mechanical accessories
• Mounting bracket for housing
• Mounting bracket for block & bleed valves
• Block&Bleed valves:
• Block&Bleed valves can be ordered as enclosed accessories (seal for mounting is
enclosed)
• Block&Bleed valves can be ordered as mounted accessories (mounted manifolds are
supplied with a documented leak test)
• Certificates (e.g. 3.1 material certificate and NACE) and tests (e.g. PMI and pressure
test) that are ordered with the device apply for the transmitter and the manifold
• During the operating life of the valves, it may be necessary to re-tighten the pack
• Water pocket pipes (PZW)
• Flushing rings
• Weather protection covers
For technical data (e.g. materials, dimensions or order numbers), see the accessory
document SD01553P.
14.1.2 Plug connectors
• Plug connector M12 90 deg, IP67 5m cable, union nut, Cu Sn/Ni
• Plug connector M12, IP67 union nut, Cu Sn/Ni
• Plug connector M12, 90 deg IP67 union nut, Cu Sn/Ni
The IP protection classes are only maintained if the dummy cap is used or the cable is
connected.
14.1.3 Weld-in accessory
For details, refer to TI00426F/00/EN "Weld-in adapters, process adapters and
flanges".
14.2

Device Viewer

All the spare parts for the device, along with the order code, are listed in the Device Viewer
(www.endress.com/deviceviewer).
Cerabar PMP71B HART
Endress+Hauser