Return; Disposal; Accessories - Endress+Hauser RIA15 Operating Instructions Manual

Accessories

24
Item Name
no.
1 Mainboard 4 to 20 mA
2 LCD module
3 Small parts set for panel-mount housing (5-pin plug-in
terminal, seal on front frame, 2x fastening clip)
4 Small parts set for field housing (5-pin plug-in terminal, seal
on cover, 2x cover hinge, grounding connection on bottom,
cover screws, grounding lug)
4 Cable gland with integrated pressure compensation
membrane
(for FMX21)
Plastic field housing W18 RAL5012, conductive
10.3

Return

The requirements for safe device return can vary depending on the device type and
national legislation.
1. Refer to the web page for information:
http://www.endress.com/support/return-material
 Select the region.
2. Return the device if repairs or a factory calibration are required, or if the wrong
device was ordered or delivered.
10.4

Disposal

If required by the Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE), the product is marked with the depicted symbol in order to minimize the
disposal of WEEE as unsorted municipal waste. Do not dispose of products bearing this
marking as unsorted municipal waste. Instead, return them to the manufacturer for
disposal under the applicable conditions.
11 Accessories
Various accessories, which can be ordered with the device or subsequently from Endress
+Hauser, are available for the device. Detailed information on the order code in question is
available from your local Endress+Hauser sales center or on the product page of the
Endress+Hauser website: www.endress.com.
RIA15
Order number
XPR0005-AAA
XPR0006-A1
XPR0006-A2
XPR0006-A3
RK01-BD
XPR0006-A4
Endress+Hauser