ESAB 100i Instruction Manual page 28

100i / 200i / 300i / 400i
B. Torch Leads Lengths
C. Torch Parts (Generic Parts Shown)
Art # A-04741
Shield Cup
D. Parts - In - Place (PIP)
The torch is designed for use with a power supply which senses coolant return flow to confirm that torch parts are in place.
If coolant return flow to the power supply is absent or insufficient the power supply will not provide power to the torch.
Coolant leakage from the torch also indicates that torch parts are absent or installed improperly.
E. Type of Cooling
Combination of gas stream through torch and liquid cooling.
F. Torch Data
Ambient Temperature
Duty Cycle
Maximum Current
Voltage (Vpeak)
Arc Striking Voltage
Current
Plasma Gases:
Shield Gases:
Operating Pressure
Maximum Input Pressure
Gas flow
28
Torch Lead Assembly
Lengths
Feet
10
15
25
50
75
100
Shield Gas
Distributor
Shield Cap Tip
Torch Ratings for use with 100i-400i Power Supply
104° F
40° C
100% @ 400 Amps
400 Amps
500V
10kV
Up to 400 Amps, DC, Straight Polarity
Torch Gas Specifications
Compressed Air, Oxygen, Nitrogen, H35, H17, Ar
Compressed Air, Oxygen, Nitrogen, Water, H35
125 psi ± 10 psi
8.6 bar ± 0.7 bar
135 psi / 9.3 bar
10 - 500 scfh
SPECIFICATIONS
Meters
3.05
4.6
7.6
15.2
22.9
30.4
Plasma Gas
Distributor
Electrode
Cartridge
0560956430