Table of Contents
Advertisement
100i / 200i / 300i / 400i
New Cartridge Assembly 400 Amp (0559211400) Consumables
Outer Cartridge, 400A
Assembly Procedure
400A Cartridge is assembled in the following steps:
1. Insert the cartridge body into the speedlok retaining ring (9-9512). Note the orientation of the brass
buttons/pins.
2. Insert the above two parts into the thread ring (9-9511), which includes a set screw, making sure to align
the four tabs with the slots in the Cartridge Body.
3. Thread the Outer Cartridge (9-7917) onto the Cartridge Body and tighten using the Torchhead Tool (9-9431).
4. Use 1.3mm Allen Wrench/hex key to insert and secure the M2.5x3mm Cup Point set screw in a clockwise
direction.
TORCH DATA 100i-400i
Thread Ring
Speedlok Retaining Ring
Cartridge Body
Not Sold Seperately
148
Art # A-10925_iSeries
Tool, Torchhead, XT
0560956430
Advertisement
Table of Contents
