Rear Panel - Teldat Atlas-i70 Installation Manual

3 Components and Power Supply
In addition to the LEDs described in the above table, the front panel also has LEDs linked to the Switch Ethernet in-
terfaces.
Ethernet interface LEDs
Fig. 2:
The table below provides information on the LEDs associated to the Switch Ethernet interface:
Switch Ethernet interface LEDs table
LED
Orange
Green

3.1.2 Rear Panel

The following figure shows the rear panel. Here you will find the majority of the Teldat Atlas-i70 router connectors.
Rear panel
Fig. 3:
The following table provides information on each connector, as well as a description:
Rear panel elements
Item
A
B
C
D
E
F
G
H
I
6
Amber -> Auto-test.
Green -> Interface up (blinking, in some cards, when there is con-
nection data activity).
Description
PoE activity.
Ethernet (link) connection estab-
lished.
Description
Power source connection (PSU).
Wi-Fi Antenna connectors. Not supported.
3G Antenna connectors. Not supported.
SD. Slot used to insert an SD card.
SIM Card. Not supported.
Aux. Provides access to the Teldat Atlas-i70 local console for configuring and
monitoring purposes.
USB. Slot used to insert a 3G USB modem.
8-port Gigabit Ethernet Switch.
PoE. Connector for power supply through Ethernet (Power over Ethernet).
State
Please see manual Teldat Dm776-I
Power Over Ethernet.
Off -> Link has not been detected.
Green -> Link detected. Blinking: con-
nection data activity.
Teldat S.A.
Teldat Router Atlas-i70