Aarp - Measurement Computing CB-7080 User Manual

CB-7080 & CB-7080D Counter/Timer User's Guide

@AARP

Description : Read the alarm limit of counter 0 (for alarm-mode 0). Refer to
for more information.
Syntax : @AARP[chk](cr)
@
AA
RP
[chk]
(cr)
Response :
Valid response
Invalid response
no response
!
?
AA
(data)
[chk]
(cr)
:
Examples
The alarm limit of counter 0 is FFFF0000h:
command:
response:
The alarm limit of counter 0 is 0000FFFFh:
command:
response:
A delimiter character
2-character HEX module address, from 00 to FF
2-character checksum. If checksum is disabled, no [chk]
0x0D
!AA[chk](cr)
?AA[chk](cr)
Syntax error, communication error or address error
A delimiter character indicating a valid response
A delimiter character indicating an invalid response
2-character HEX module address
8-character HEX value.
2-character checksum. If checksum is disabled, no [chk]
0x0D
@01RP(cr)
!01FFFF0000(cr)
@02RP(cr)
!020000FFFF(cr)
"Counter alarm mode
2-50
@AARP
selection"