Aannttccff - Measurement Computing CB-7080 User Manual

CB-7080 & CB-7080D Counter/Timer User's Guide

%AANNTTCCFF

: Set the configuration of a module.
Description
Syntax : %AANNTTCCFF[chk](cr)
%
AA
NN
TT
CC
FF
[chk]
(cr)
Response:
Valid response:
Invalid response:
No response
!
?
AA
[chk]
(cr)
Examples :
The address of module 01 is configured to a new address 02, counter mode:
command:
response: !02(cr)
Change to frequency mode:
command:
response:
A delimiter character.
Current 2-character HEX module address, from 00 to FF
New 2-character HEX module address, from 00 to FF
Input type code, refer to Table 1-10.
Baud rate code, refer to Table 1-8.
Status code, refer to Table 1-9.
2-character checksum. If checksum is disabled, no [chk]
0x0D
!AA[chk](cr)
?AA[chk](cr)
Syntax error, communication error or address error.
A delimiter character indicating a valid response
A delimiter character indicating an invalid response
2-character HEX module address
2-character checksum. If checksum is disabled, no [chk]
0x0D
%0102500600(cr)
%0202510600(cr)
!02(cr)
2-4
%AANNTTCCFF