Aa0L(Data) - Measurement Computing CB-7080 User Manual

CB-7080 & CB-7080D Counter/Timer User's Guide

$AA0L(data)

Description : Sets the minimum input signal width at low level. Refer to
information.
Syntax : $AA0H(data)[chk](cr)
$
AA
(data)
[chk]
(cr)
Response :
Valid response
invalid response
no response
!
?
AA
[chk]
(cr)
:
Examples
Min. width = 20 µs
command:
response:
Min. width = 2000 µs = 2 ms
command:
response:
A delimiter character
2-character HEX module address, from 00 to FF
5-character decimal value for min. width at low level. The unit is microseconds
(µs), and the range can be from 2 µs to 65535 µs.
2-character checksum. If checksum is disabled, no [chk].
0x0D
!AA[chk](cr)
?AA[chk](cr)
Syntax error, communication error or address error
A delimiter character indicating a valid response
A delimiter character indicating an invalid response
2-character HEX module address
2-character checksum. If checksum is disabled, no [chk].
0x0D
$010H00020(cr)
!01(cr)
$020H02000(cr)
!02(cr)
"Digital filter
2-12
$AA0L(data)
setting" for more