Aaas - Measurement Computing CB-7080 User Manual

CB-7080 & CB-7080D Counter/Timer User's Guide

~AAAS

Description : Sets counter alarm mode. Refer to
information.
Syntax : ~AAAS[chk](cr)
~
AA
S=0
S=1
[chk]
(cr)
:
Response
Valid response
invalid response
no response
!
?
AA
[chk]
(cr)
Examples :
Set alarm mode=0.
command:
response:
Set alarm mode=1.
command:
response:
"Counter alarm mode
A delimiter character
2-character HEX module address, from 00 to FF
alarm mode 0.
alarm mode 1.
2-character checksum. If checksum is disabled
0x0D
!AA[chk](cr)
?AA[chk](cr)
Syntax error, communication error or address error
A delimiter character indicating a valid response
A delimiter character indicating an invalid response
2-character HEX module address
2-character checksum. If checksum is disabled, no [chk].
0x0D
~01A0(cr)
!01(cr)
~02A1(cr)
!02(cr)
selection" on page 1-7 for more
no [chk]
2-7
~AAAS