Aao(Name) - Measurement Computing CB-7080 User Manual

CB-7080 & CB-7080D Counter/Timer User's Guide

~AAO(name)

Description : Sets the module name.
: ~AAO(name)[chk](cr)
Syntax
~
AA
(name)
[chk]
(cr)
Response :
Valid response
invalid response
No response
!
?
AA
[chk]
(cr)
:
Examples
Change module name from 7080 to 8080
command:
response:
command:
response:
Change module name from 7080D to 8080D
command:
response:
command:
response:
Note
This command was designed for OEM/ODM users. You can use it to change the module name for other
purposes.
A delimiter character
2-character HEX module address, from 00 to FF
4-character/5-character module name
2-character checksum. If checksum is disabled, no [chk]
0x0D
!AA[chk](cr)
?AA[chk](cr)
Syntax error, communication error or address error
A delimiter character indicating a valid response
A delimiter character indicating an invalid response
2-character HEX module address
2-character checksum. If checksum is disabled, no [chk].
0x0D
$01M(cr)
!017080(cr)
~01O8080(cr)
!01(cr)
$01M(cr)
!017080D(cr)
~01O8080D(cr)
!01(cr)
2-8
~AAO(name)