CB-7080 & CB-7080D Counter/Timer User's Guide
#AAN
Description:
Read the counter or frequency value.
: #AAN[chk](cr)
Syntax
#
AA
N=0
N=1
[chk]
(cr)
Response
:
Valid response
invalid response
no response
>
(data)
[chk]
(cr)=0x0D
Examples
:
Counter − 0=0x1E=30 (in decimal):
command:
response:
command:
response:
Frequency − 1=0x1E Hz = 30 Hz (in decimal):
command:
response:
command:
response:
A delimiter character
2-character HEX module address, from 00 to FF
Read Channel-0 counter or frequency value
Read Channel-1 counter or frequency value
2-character checksum. If checksum is disabled, no [chk]
0x0D
[chk](data)(cr)
No Response
Syntax error, communication error or address error.
A delimiter character indicating a valid response
8-character data (in HEX format)
2-character checksum. If checksum is disabled, no [chk]
$012(cr)
!01500600(cr)
#010(cr)
>0000001E(cr)
$022(cr)
!02510600(cr)
#021(cr)
>0000001E(cr)
2-1
#AAN
Need help?
Do you have a question about the CB-7080 and is the answer not in the manual?