Aa0H(Data) - Measurement Computing CB-7080 User Manual

CB-7080 & CB-7080D Counter/Timer User's Guide

$AA0H(data)

Description : Sets the minimum input signal width at high level. Refer to
for more information.
Syntax : $AA0H(data)[chk](cr)
$
AA
(data)
[chk]
(cr)
Response :
Valid response
invalid response
No response
!
?
AA
[chk]
(cr)
Examples :
Min. width = 10 µs
command:
response:
Min. width = 1000 µs = 1 ms
command:
response:
A delimiter character
2-character HEX module address, from 00 to FF
5-character decimal value for minimum width at high level. The unit is
microseconds ( s) and the range can be from 2 s to 65535 s.
2-character checksum. If checksum is disabled, no [chk].
0x0D
!AA[chk](cr)
?AA[chk](cr)
Syntax error, communication error or address error
A delimiter character indicating a valid response
A delimiter character indicating an invalid response
2-character HEX module address
2-character checksum. If checksum is disabled, no [chk]
0x0D
$010H00010(cr)
!01(cr)
$020H01000(cr)
!02(cr)
"Digital filter
2-10
$AA0H(data)
setting" on page 1-8