Aa1 - Measurement Computing CB-7080 User Manual

CB-7080 & CB-7080D Counter/Timer User's Guide

~AA1

Description: Resets the module status. The module status will be latched until ~AA1 command is sent. If the
module status=4, all output commands will be ignored. Read the module status first to verify that the module
status is 0. If the module status is not 0, only a ~AA1 command can clear the module status.
Syntax : ~AA1[chk](cr)
~
AA
[chk]
(cr)
Response :
Valid response
invalid response
No response:
!
?
AA
[chk]
(cr)
Examples :
Module status=0x04 host is down:
command:
response:
Output command is ignored:
command:
response:
Clear module status:
command:
response:
Module status=0x00:
command:
response:
Output command is OK:
command:
response:
A delimiter character
2-character HEX module address, from 00 to FF
2-character checksum If checksum is disabled, no [chk]
0x0D
!AA[chk](cr)
?AA[chk](cr)
Syntax error, communication error or address error
A delimiter character indicating a valid response
A delimiter character indicating an invalid response
2-character HEX module address
2-character checksum. If checksum is disabled, no [chk]
0x0D
~010(cr)
!0104(cr)
@01DO00(cr )
!(cr)
~011(cr)
!01(cr)
~010(cr)
!0100(cr)
@01DO00(cr)
>(cr )
2-4
~AA1