Table of Contents
Advertisement
9
CUSTOMER INTERFACE
J35µP - RS232
Connectivity
rack
TLE Series 600
J35µP - RS232
Connectivity
rack
TLE Series 800
Fig. 9-1 TLE Series 600 & 800 - Connectivity rack and Serial port J35µP – RS232
TLE Series 600 & 800 has the following equipment's:
Serial Port J35µP - RS232 (see Section 9.1).
-
Customer Interface board (see Section 9.2).
-
Connectivity rack ready for the installation of four connectivity boards.
-
Possible connectivity configurations with TLE Series 600 & 800
11
9
10
7
8
5
6
4
2
3
1
21
22
19
20
17
18
16
14
15
12
13
Fig. 9-2 Connectivity Slots
ATTENTION !
The installation of any option board must be performed by QUALIFIED SERVICE
PERSONNEL.
Prior to the installation, connection and cabling of any option board the UPS
must be COMPLETELY POWERED DOWN and all the power sources that will be
connected to the option board must be DE-ENERGIZED.
Option board shall be connected only to Safety Extra Low Voltage circuits (SELV
for IEC-UL-CSA60950-1): voltage up to 30Vac / 42.4Vpk or 60Vdc maximum and
galvanically separated from AC Mains supply.
Modifications reserved
GE_UPS_OPM_TLE_SCE_M60_M80_1GB_V020.docx
Q1
Q1
For a Single UPS it's possible to install the following
connectivity boards:
-
J2
J3
-
For a Parallel System (max. 6 UPS) it's possible to install
J5
the following connectivity boards:
J4
-
-
Critical Power
J35µP - RS232
Connectivity rack
max. 3 "Customer Interface" boards;
max. 2 "3-ph SNMP/WEB Plug-in Adapter" boards.
max. 3 "Customer Interface" boards for each UPS;
max. 2 "3-ph SNMP/WEB Plug-in Adapter" boards for
Parallel System.
Page 135/146
User Manual TLE Series 600 & 800 CE S1
Advertisement
Table of Contents
