Control Cables Interconnection - GE TLE series 600 User Manual

5.7.3 Control cables interconnection

WARNING !
All the cables interconnection must be performed by QUALIFIED SERVICE
PERSONNEL only.
TLE Series 600 - Control cables interconnection
Pos. Connection
1
XD1 – HAN Connector male (46 poles)
2
XD2 - HAN Connector male (32 poles)
3
XTR2A - Connector
Fig. 5.7.3-2 Connection of hearting connectors (HAN connectors)
Modifications reserved
GE_UPS_OPM_TLE_SCE_M60_M80_1GB_V020.docx
Power Section cabinet
1
XD2 Connector (32 poles)
1
XD2
(32 poles)
XD1 Connector (46 poles)
XD1
(46 poles)
Fig. 5.7.3-1 TLE Series 600 – Control cables interconnection
Critical Power
In/Out Section cabinet
2
XD2
(32 poles)
XD1
(46 poles)
From
"Power Section cabinet"
"Power Section cabinet"
"Power Section cabinet"
NOTE: All these connections must be performed by
QUALIFIED SERVICE PERSONNEL only.
Proper dressing needs to be done for each cable
assembly in order to reduce the stress.
All the cables must be sufficiently (at least 10cm/4")
away from all live parts.
Cable binders used to support the wiring must NOT be
overly tightened.
2
Connecting to
"In/Out Section cabinet"
"In/Out Section cabinet"
"In/Out Section cabinet"
XTR2 Connector
Page 42/146
User Manual TLE Series 600 & 800 CE S1