Setup - GE TLE series 600 User Manual

7.4

SETUP

In this mode the keys perform the following functions:
Shows the main screen MEASURES.
See Section 7.2.
Shows the main screen EVENTS.
See Section 7.3.
Return to HOME screen.
Shows the main screen COMMANDS.
See Section 7.5.
Shows the operating status of the RPA PARALLEL SYSTEM.
See Section 7.6.
Key to reset general alarm and buzzer.
Shows the screen User.
Shows the screen Service Basic.
Reserved for the Service Centre,
code
Shows the screen Service Full.
Reserved for the Service Centre,
code
Modifications reserved
GE_UPS_OPM_TLE_SCE_M60_M80_1GB_V020.docx
.
.
Critical Power
The SETUP mode is entered any time the
"SETUP" key is pressed.
This screen allows the user to modify
some parameters permitting to adapt
some functions of the UPS to his/her
needs, described as follows.
The LCD will display a series of screens
containing
accessible without password protection.
at this level the parameters access is protected by a
at this level the parameters access is protected by a
SETUP
the user parameters,
Page 90/146
User Manual TLE Series 600 & 800 CE S1