GE TLE series 600 User Manual page 97

Rectifier
Inverter
NOTE !
When eBoost™ Operation Mode or IEMi Operation Mode is enabled, control of
Inverter status and selection of the feed path is done autonomously by the
UPS control logic.
Therefore, Inverter ON / Inverter OFF commands are disabled when eBoost™
Operation Mode or IEMi Operation Mode is enabled.
This command is also used as EPO (Emergency Power Off) reset after the contact closing.
NOTE !
Inverter OFF command is disabled when eBoost™ Operation Mode or IEMi
Operation Mode is enabled.
Modifications reserved
GE_UPS_OPM_TLE_SCE_M60_M80_1GB_V020.docx
Critical Power
Rectifier ON
Rectifier switching ON command.
Rectifier RESET
Rectifier restore command.
Reserved for the Service Centre.
Led Rectifier status
Indicates the Rectifier's status: ON = lit
Inverter ON
Inverter switching ON command.
Inverter OFF
Inverter switching OFF command.
Led inverter status
It indicates the Inverter status:
ON / OFF / Pre-charge / Pre-charge completed / Soft-start
COMMANDS 1 SCREEN
Allows the user to execute UPS
operation commands.
OFF = turned Off
User Manual TLE Series 600 & 800 CE S1
Page 97/146