Introduction; Information About Your Fireplace - Valor LX2 Series Installation & Owner's Manual

OWNER'S
INFORMATION
Thank You ...
For purchasing a Valor by Miles Industries. Your new
radiant gas heater is a technical appliance that must
be installed by a qualifi ed dealer. Each Valor fi replace
is fully tested during the production process for your
safety and comfort.
Your unit has been professionally installed by:
Dealer Name: ________________________________
Phone Number :_______________________________
Should you encounter an operational problem, call
your dealer immediately.
Do not try to repair the unit as you may cause an
injury or damage the fi replace.

Information About Your Fireplace

WARNING
!
DO NOT ATTEMPT TO TOUCH THE DATA CARD
WHILE THE FIREPLACE IS STILL HOT! Let the
fi replace cool fi rst before touching it.
The Fireplace and Lighting Information card is located
behind the front panel of the appliance, below the
window. To access the card, the barrier screen and the
base plate on which it sits must be removed.
1. The screens are held to the fi replace by magnets.
Remove the screens:
a) pull out the top of the front screen;
b) lift out the front screen;
c) pull out the top of the side screen;
d) lift out the side screen.
b
6

INTRODUCTION

c
a
d
2. From the open corner,
a) slide the base plate sideways;
b) lift the plate up.
3. The card is located at the right hand side below
the window. Grab the card and pull it out. There is
important information on both sides of the card.
Window
The data card is located behind the front panel below
the window at the right-hand side.
Fireplace
739MN
FOR NATURAL GAS POUR LE GAZ NATUREL
model
Serial
number
CIRCULATING FAN KIT 755CFK VENTILATEUR POUR CIRCULATION D'AIR 755CFK
120V, 60Hz, LESS THAN 1A
#4003360-741, #4003293-742, #4003313-745, #4003426-765, #4004666 772
b
a
Data
card
24,000
6,500
3.2"
5.0"
739N 10000
750
120V, 60Hz, MOINS DE 1A
4006176N/01