Using The Wall Switch; Kits & Accessories - Valor LX2 Series Installation & Owner's Manual

The Wall Switch can be used to
control your fi replace. You can
turn the pilot on or off and you can
increase or decrease the fl ame
height.
Note that the thermostat and
programming functions are not
available with the wall switch.
TO TURN APPLIANCE ON and OFF
Press ON-OFF button once to light
pilot. Press again to shut of pilot.
Required Kits
Information accurate at the time of printing and subject
to change without notice.
4006887 LX2 Barrier Screen—Front panel
4006888 LX2 Barrier Screen—Side panel
Fuel Beds (choose one)
1705DWK Driftwood Set Kit
2200DGM Murano Glass Set
2200DGS Decorative Glass Set
1700SWK Splitwood Kit
1700RSS Rocks & Shale Set
Liners + Liner End Panel (choose one)
2200FBL+ Fluted Black Liner Set
2200FBP Fluted End Panel
2200RGL+ Refl ective Glass Liner Set
2200RGP Refl ective Glass End Panel
2200LML+ Limestone Liners
2200LMP Limestone End Panel
LDK HeatShift (choose one)
LDK1 Quad Plenum 48"
LDK3 Double Plenum 14" (2) with Grille
LDK4 Quad Plenum 38"
LDK7 Duct Termination Plates (for valance outlet)

USING THE WALL SWITCH

KITS & ACCESSORIES
TO ADJUST FLAME HEIGHT
Press and hold large fl ame
to gradually increase fl ame height.
Press and hold small fl ame
gradually decrease fl ame height.
Optional Accessories
Information accurate at the time of printing and subject
to change without notice.
Conversion Kits
2200XNGK Conversion to natural gas
2200XPGK Conversion to propane gas
Other Accessories
LDK2 48" Finishing Frame for LDK1
LDK5 38" Finishing Frame for LDK4
5" dia Aluminum 2-ply Flex Kit— 2 x 10'–0"
LDK6
lengths, may be cut to required length
2200ULK Underbed Lighting Kit (for 2200DGS)
1270RBK Remote Blower Kit
Hearth Hearth gates such as Cardinal's
VersaGates are available at retail stores
Gate
carrying safety products for children.
OWNER'S
INFORMATION
button
button to
15